Quick Delivery NONPLUS COMPONENTS Front Hub GEN2 Gravel | 6-hole black 15×100 mm

NONPLUS COMPONENTS front hub GEN2 Gravel | 6-hole black 15×100 mm

Three decades of experience in the development and production of hubs leave their mark, albeit “very light”.
Over the years, the head of development at NONPLUS COMPONENTS, Christian Jenny, has been able to accumulate immense specialist and practical knowledge, which in 2016, after finding an investor, led to the production of the first prototypes.
In order to be able to guarantee the precise production of the hubs, the company Frank Präzisionsteile GmbH from Murr in Baden-Württemberg, which is also the investor, took over the production. A little later, in 2018, NON+ was registered as a trademark. Since then, the wheels have not stood still at one of the most innovative think tanks for bike components in Germany. New concepts are constantly being developed and patents registered in order to be able to set new standards in the future.

The NONPLUS front hub is the heart of your new, ultra-light wheelset. Despite its almost 83g weight, the hub has no restrictions regarding the area of intended use . The black anodised finish not only looks good, it also protects the oversized hub body from corrosion. In the end, the whole thing revolves around two high-quality 6803 2RS deep groove ball bearings, which are placed on a 17 mm axle . The conclusion is formed by the micro gap end caps, which also form a seal against the elements.

The NONPLUS for your gravel adventures.

The NONPLUS front hub is the heart of your new, ultra-light wheelset. Despite its low weight, the hub has no restrictions in terms of its area of intended use . The black anodised finish not only looks good, it also protects the oversized hub body from corrosion. In the end, the whole thing revolves around two high-quality 6803 2RS deep groove ball bearings, which are placed on a 17 mm axle . The conclusion is formed by the micro gap end caps, which also form a seal against the elements.

GEN2
Thanks to high-precision production and perfect quality control, the second-generation hubs do not require the bearing play adjuster previously used. This means you always have a perfectly adjusted hub with a smooth, easy run.

precision and quality
The elimination of disruptive factors such as flex, vacuum effect, torn spokes and tolerances, through the highest precision in material selection, manufacturing process and quality assurance, enable a guarantee period of 4 years!

simplification
The filigree transition between the brake disc mount and the flange saves weight and at the same time generates more strength.

Non-vacuum effect
A unique ventilation system prevents the creation of negative pressure due to temperature fluctuations in the hub. As a result, no water is sucked through the ball bearings, which ensures a significantly longer service life and noticeably smooth running of the bearings.

special sealing
Micro gap end caps improve the sealing of the individual hub components.

Note: The hub is a high-end product with a focus on minimal weight. The selected bearings are a small compromise for particularly smooth running and maximum speed. The special seal reduces friction, but requires a little more maintenance. Technical specifications:

Area of intended use : Gravel, road bike, CX, MTB
Material: anodized aluminum
Axle standard : 15×100 mm thru axle type
Number of holes: 24, 28 or 32 holes
Brake disc mount: 6-hole (IS2000)
bearing : industrial deep groove ball bearing (2x 6803 2RS)
Spoke Type: Standard Spokes (J-Bend)
Max. permissible spoke tension: 1200N
maximum system weight: no limitation
Colour: black with lasered logos

Weight according to the manufacturer: 81g
Weight weighed: 82.7g Scope of delivery: 1x NONPLUS COMPONENTS front hub GEN2 Gravel | 6-hole black 15×100 mm