Promotion REVOLOOP Tube Fatbike 26″ REVO.FAT SV 40 mm

REVOLOOP tube Fatbike 26″ REVO.FAT SV 40 mm

REVO.FAT – Lightweight fat bike

The REVO.FAT was developed as a lightweight hose for fat bikes with casing widths from 3.8 to 5 inches. With a weight of less than 160 grams, it reduces the moving, rotating mass on the bike and makes biking more agile. Compared to conventional butyl hoses, the REVO.FAT saves approx. 250 grams of moving mass – and that per wheel! Despite its light weight, this tube has high puncture and snakebite resistance. This ensures puncture resistance and safety on the trail. The material formulation specially developed for this tube combines very high mechanical strength with simultaneous elasticity of the material and thus enables the innovative, specific property profile of this bicycle tube. The valve made of particularly impact and break-resistant thermoplastic material is ahead of its time. Minimum weight paired with maximum performance. A specially designed, blind-welded valve foot prevents damage to the tube from sharp edges on the rim’s valve hole. The tough plastic minimizes the potential for valve tearing during the toughest downhill rides with low air pressure.

IMPORTANT: Please never fill your REVOLOOP tube outside of the jacket with a pressure of more than 0.5 bar. Otherwise there is a risk that the REVOLOOPs will locally overstretch or even burst. Both scenarios mean that the tube is then unusable because the overstretching of the tube does not deform it back and the tube can therefore no longer be installed. Therefore: only apply a pressure of more than 0.5 bar to REVOLOOP hoses when they are fully assembled.

Light and stable – REVOLOOP valves
The valves developed by REVOLOOP are made of a special, high-strength thermoplastic polyurethane. They combine the highest technical standards with minimal weight and sophisticated design. The internally welded valve foot plate protects the tube from damage caused by sharp edges on the valve hole in the rim and the dreaded valve tearing off.

Virtually seamless – REVOLOOP welding technology
REVOLOOP’s patent-pending welding process makes it possible for the first time to weld thermoplastic hoses with thick walls in such a way that an almost even seam can be produced. This technologically sophisticated process achieves perfect rolling comfort and at the same time maximum security against failure through snakebite and punctures.

Ecologically responsible – REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. Since both the tube material and the valve are made of TPU, REVOLOOP bicycle tubes can be completely recycled. Out of responsibility towards the environment.

Made in Germany! Technical specifications:

Material: Thermoplastic Polyurethane (TPU)
intended use : Fat bike
Compatible sizes (inches): 26 x 3.8 to 26 x 5
Compatible sizes (ETRTO): 96 – 559 to 127 – 559
Valve Length: 40mm
Valve standard: SV, changeable (Sclaverand, Presta, French valve, racing bike valve)
Color white

Weight according to the manufacturer: 159g
Weight weighed: 154g Scope of delivery: 1x REVOLOOP tube Fatbike 26″ REVO.FAT SV 40 mm

Note: The weights of the hoses may vary due to production.

EAN:
4260573071043

MPN:
SW10022