Limited Edition DT SWISS Suspension Fork 29″ F 232 One 100 mm Two in One Remote tapered BOOST schwarz 51 mm Offset

DT SWISS suspension fork 29″ F 232 One 100 mm Two in One Remote tapered BOOST black 51 mm offset

In order to produce a competitive product, all requirements for the respective application must be met. DT Swiss has always done this with Swiss precision and a sense of unique quality.
In order to achieve holistic performance, however, you have to do more. DT Swiss has redefined the key factors for cross country riding and taken them to the next level to bring you the ultimate suspension fork.

Cross country is constantly evolving, the descents are becoming steeper, the counter climbs of technical and artificial obstacles such as rock gardens, berms and drops place significantly higher demands on people and material. The F 232 ONE was developed precisely for these challenges. A nature-inspired fork shape places the material exactly where the forces are greatest, setting new standards in terms of stiffness-to-weight ratio.
The three-stage adjustment of the INCONTROL damping while riding offers you the perfect pressure level for every situation: LOCK for sprints, DRIVE for technical climbs and the OPEN mode allows you to leave the brakes open when going downhill. INCONTROL
With Incontrol, DT Swiss provides a platform that can be adjusted in three stages. In open mode you have maximum sensitivity and traction. The slightly higher compression damping in Drive mode guarantees you efficient propulsion off-road and Lock lets you master the approach to your favorite trail in a new best time.

LINEAIR
The large volume of the positive and negative air chambers is the key to the linear spring curve, which is also responsible for the back pressure in the middle travel. An air bypass automatically balances the air suspension system of the F 232 ONE fork.

apartment
The APT (Adaptable Progression Tune) system allows the progression of the spring characteristic to be adjusted by simply adding or removing one or more volume spacers in the air chamber of the suspension fork. This allows the biker to adapt the spring characteristics to his riding style and trails. The highlight: The response behavior always remains the same, regardless of the selected setup.

Two in one remote lever
DT Swiss enables the suspension fork to be locked from the handlebars. This gives you the opportunity to adapt your suspension to the given conditions in a flash using the 2-stage control. Technical specifications:

Area of intended use : cross country, marathon
E-bike ready: no
Wheel size: 29″
Material fork crown/shaft: aluminum / aluminum
Material standpipes/脴: aluminum, black anodized / 32 mm
Material fork tubes: Magnesium cast alloy
Axle standard : axle type mm BOOST thru axle
Steerer tube: 1.5″ to 1 1/8″ tapered
Steerer tube length: 230 mm
Travel: 100mm
Spring system: Lineair
Adjustment of the spring characteristic: yes, via spacers (APT system)
Cushioning: Incontrol
Lockout: 3 levels (Open, Drive, Lock) adjustable on the remote lever
Installation height: 507 mm
Brake mount: Postmount PM6 (160 mm)
max. permissible brake disc size: 203 mm
max. system weight: 130 kg
ASTM classification: ASTM 3
Tire diameter max.: 750 mm
Tire width max.: 73 mm / 2.5″ (with max. 720 mm tire diameter)
Offset: 51mm
Colour: black, matte

Weight according to the manufacturer: 1480g (without thru axle)
Weight weighed: 1493g (without thru axle) Scope of delivery:

1x DT SWISS suspension fork 29″ F 232 One 100 mm Two in One Remote tapered BOOST black 51 mm offset
1x DT SWISS Two-in-One Remote Lever
1x DT SWISS 15 x 110 mm Boost thru axle
1x fender
1x APT Kit (volume spacer)
1x Ahead fork claw
2x brake line holder

EAN:
7613052370620

MPN:
F232OCHLPGAS26792S

PDF

Manuals / Downloads