Free Delivery Wheelset E-Bike 29″ XC AM EN | Chris King MTB Center Lock Hubs | Duke Carbon Rims

Wheelset E-Bike 29″ XC AM EN | Chris King MTB Center Lock hubs | Duke Carbon rims

Area of intended use : E-Bike, Cross Country XC, All Mountain AM to Enduro EN

This wheel set also defies the special loads of an e-bike drive. The indestructible Chris King hubs and the excellently processed Duke rims also forgive a driving mistake. The balanced selection of components guarantees you high reliability and a long service life.

hubs
There is a certain myth attached to CHRIS KING hubs. They have been on the market almost unchanged for years and yet they are not old-fashioned. Thanks to the proven technical inner workings, constant further development in detail and unmistakable optics, they have developed into a true cult object.
Due to the large hub flange of the ISO hubs, shorter spokes can be used when building wheels. This not only saves weight, but also enables a very stable and durable wheel.
The unmistakable sound of the freewheel is the hallmark of the rear wheel hubs. Described by Chris King himself as the “Angry Bee Sound”, the sound of the angry bee, which is generated by the 72 grid points of the stainless steel toothed disc. With this 3-part RingDrive system, every step is immediately converted into propulsion without much free travel.
The heart of the hub are the ball bearings. These are also developed and produced directly by Chris King. This means that they can be fully adapted to the specific loads and forces. Due to the multiple seal, the ingress of water or dirt is almost impossible.

rims
The rims from Duke from France stand for low weight and excellent workmanship. The hookless construction is ideal for using tubeless systems. The reinforced bead means that any punctures can be better tolerated without causing damage. The fairly flat and wide rims reliably support the tires in every situation, so you don’t have a spongy driving experience even with little air pressure.
The asymmetrical shape enables more even spoke tension, which further increases the rigidity of the entire wheel.

spokes
The Race spoke is the classic from Sapim! It is a round spoke with a butted middle part with a diameter of 1.8 mm. This provides more damping than non-tapered spokes. In addition, short peak loads can be better digested. The Race spoke enables very stiff and stable wheels for practically every intended use . The weight including nipples is approx. 6.95g per piece. Impeller construction at R2-Bike

Our wheels are assembled entirely by hand by our wheel builders. During the entire construction, it is important that not only the concentricity is right, but also that the spoke tension is as even as possible. The special care allows us to give a lifetime guarantee against broken spokes, as long as this is not caused by violence!

You will also receive the following services with our wheels:

A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths to be able to repair the impeller at short notice even after an accident.
A free initial check of the impeller, where the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge for the material! Technical specifications:

Area of intended use : E-Bike, Cross Country XC, All Mountain AM to Enduro EN
Wheel size: 29″ (ETRTO: 622 x see detailed description)
Rim Type: Clincher (clincher and folding)
Brake type: disc brake
Brake disc mount: Center Lock

weights:

1399g (lightest variant: Boost Ceramic + Boost Ceramic, Lucky Jack 6Ters, 28 holes, Sapim Race)
1901g (heaviest variant: Boost + Boost, Fury Jack 6Ters, 32 holes, Sapim Race)

Notice:
Due to manufacturing variations in all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals/rim stickers.

The specified delivery time refers to the usual time it takes to assemble the wheelset and does not reflect the availability of the individual parts.

If you would like special spokes on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team. Scope of delivery:

1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x assembly certificate
2x hologram stickers