Of course, only high-quality, double-sealed industrial bearings with a special lubricant continue to be used. The grease used by Newmen offers 25% more water absorption and a very high bleeding temperature, which protects the bearings from premature wear and corrosion.
The design of the freewheel is completely different from the previous model. The goal was low noise. The FADE pawl system came out. 3 pawls engage in a new type of tooth profile. To increase durability, the diameter was increased and the individual pawls were made short and wide. The resulting forces are thus distributed over a large area.
Despite the relatively low weight, safety was not spared. It is better to use a little more material in critical areas, such as. For example, at the transition between the brake disc and spoke holder, as a risk of a defect. Newmen is so convinced of the FADE hubs that they are also approved for e-bike use.
All Newmen hubs are developed and produced in Germany. This means that the manufacturing process can be optimized at any time and a consistently high quality can be guaranteed.
Material: aluminum 7075
axle type : 12x148mm thru-axle BOOST
Number of holes: 28 holes
Brake disc mount: Center Lock
Freewheel compatibility: 9-, 10-, 11-speed Shimano / SRAM MTB
Freewheel type: pawl freewheel with 3 pawls and 36 notches
bearing : 4x industrial deep groove ball bearings
Spoke type: Straightpull (straight)
Spoke tension: 1200 Nm
maximum system weight: 120 kg (driver, bike, clothing and possibly luggage)
Silver
Weight weighed: 240g
EAN:
4054571185464
MPN:
90665
Reviews
There are no reviews yet.