Excellent Quality NONPLUS COMPONENTS Rear Hub Gen 2 | 6-Hole black 12×157 mm SuperBOOST Freehub Shimano Micro Spline

NONPLUS COMPONENTS rear hub GEN 2 | 6-hole black 12×157 mm SuperBOOST freewheel Shimano Micro SplineThree decades of experience in the development and production of hubs leave their mark, albeit “very light”.Over the years, the head of development at NONPLUS COMPONENTS, Christian Jenny, has been able to accumulate immense specialist and practical knowledge, which in 2016, after finding an investor, led to the production of the first prototypes.In order to be able to guarantee the precise production of the hubs, the company Frank Präzisionsteile GmbH from Murr in Baden-Württemberg, which is also the investor, took over the production. A little later, in 2018, NON+ was registered as a trademark. Since then, the wheels have not stood still at one of the most innovative think tanks for bike components in Germany. New concepts are constantly being developed and patents registered in order to be able to set new standards in the future.

The NONPLUS rear wheel hub is a masterpiece of technology and unique due to its weight in connection with approval for almost every application in cycling. The black anodized oversized hub body forms the heart of the hub, around which everything revolves. Two generously sized bearings support the hub body on a 17 mm axle , two more bearings carry the freewheel and the micro-gap end caps keep dirt and water away from the inside of the hub. A brake disc mount, which extends directly to the spoke flange, ensures optimal transmission of the braking forces. The patented freewheel mechanism is hidden on the opposite side. The unique conical gearing has a contact surface that is approx. 400% larger than conventional spur gearing and thus enables maximum power transmission with minimal wear. The special, very elaborately manufactured tooth back, together with the hard anodized surface, ensures low abrasion and thus also increases the service life. The 45-fold toothing results in a maximum idle travel of 8°. This gives you direct propulsion, for example in difficult passages, when you need it and you don’t lose any valuable time when sprinting to the finish line.GEN2
Thanks to high-precision production and perfect quality control, the second-generation hubs do not require the bearing play adjuster previously used. This means you always have a perfectly adjusted hub with a smooth, easy run.

precision and quality
The elimination of disruptive factors such as flex, vacuum effect, torn spokes and tolerances through the highest precision in material selection, manufacturing process and quality assurance enable a guarantee period of 4 years!

NONPLUS conical gearing
The unique freewheel mechanism of the NONPLUS hubs has approx. 400% more contact surface than conventional systems and enables maximum power transmission with minimum wear. This means a great advantage over conventional ratched systems, since the forces are transmitted from the freewheel more selectively than over a large area. Special, very elaborately manufactured tooth backs reduce abrasion many times over, hard anodizing ensures long durability.

Tooth to Tooth
The 1:1 toothing plays a major role in the perfect ratio of pedal kickback and propulsion. This guarantees direct power transmission via 45 defined locking points without detours from the freewheel to the hub body.

E-bike compatible
Although the hubs hardly weigh more than 170g, they are still fully suitable for e-bikes (pedelecs).

simplification
The filigree transition between the brake disc mount and the flange saves weight and at the same time generates more strength.

Non-vacuum effect
A unique ventilation system prevents the creation of negative pressure due to temperature fluctuations in the hub. As a result, no water is sucked through the ball bearings, which ensures a significantly longer service life and noticeably smooth running of the bearings.

special sealing
Micro gap end caps improve the sealing of the individual hub components. Technical specifications:

intended use : Cross Country to E-Bike
Material: aluminum
Material freewheel body: aluminum, hard anodized for low wear
axle type : 12×157 mm plug axis (Superboost +)
Number of holes: 28 or 32 holes
Brake disc mount: 6-hole (IS2000)
Freewheel compatibility: 12-speed Shimano Micro Spline
Freewheel type: conical gearing, 45 detents
bearing : 4x Industry deep groove ball bearings (1x 17287 2RS, 3x 6803 2 RS)
Spoke Type: Standard Spokes (J-Bend)
Max. permissible spoke tension: 1200N
maximum system weight: kA
Colour: black with white lasered decals

Weight according to the manufacturer: 185g
Weight weighed: 187.3g Scope of delivery: 1x NONPLUS COMPONENTS rear hub GEN 2 | 6-hole black 12×157 mm SuperBOOST freewheel Shimano Micro Spline