Best Guaranteed NEWMEN Rear Hub MTB FADE Straightpull 6-Loch silver | 12x148mm Thru Axle BOOST | SRAM XD

NEWMEN rear hub MTB FADE Straightpull 6-hole silver | 12x148mm thru axle BOOST | SRAM XD

The FADE rear hubs will also find many fans again. If you are looking for a lightweight yet resilient wheel center, you can hardly get past them. Here, too, you do not need to worry about setting the axial bearing play. The long-life bearings are precisely and stress-free already pressed in at the factory. A high degree of user-friendliness has been gained through this further development. You can better spend the saved time on your favorite trail.
Of course, only high-quality, double-sealed industrial bearings with a special lubricant are still used. The grease used by Newmen has a 25% higher water absorption capacity and a very high bleeding temperature, which protects the bearings from premature wear and corrosion.
The construction of the freewheel is completely different from the previous model. The goal was a low level of noise. The result was the FADE pawl system. Thereby 3 pawls engage in a new type of tooth profile. To increase durability, the diameter has been increased and the individual pawls have been made short and wide. In this way, the resulting forces are distributed over a larger area.
Despite the relatively low weight, security was not compromised. It is better to build in a little more material at critical points, like. For example, at the transition between the brake disc and spoke mounts, as risking a defect. Newmen is so convinced of the FADE hubs that they are also approved for e-bike use.

All Newmen hubs are developed and produced in Germany. This means that the manufacturing process can be optimized at any time and consistently high quality guaranteed. Technical specifications:

intended use : Cross Country to Downhill, E-Bike
Material: aluminum 7075
axle type : 12x148mm thru-axle BOOST
Number of holes: 28 holes
Brake disc mount: 6-hole (IS2000)
Freewheel compatibility: 11-, 12-speed SRAM XD
Freewheel type: pawl freewheel with 3 pawls and 36 notches
bearing : 4x industrial deep groove ball bearings
Spoke type: straight pull (straight)
Spoke tension: 1200 Nm
maximum system weight: 120 kg (driver, bike, clothing and possibly luggage)
Color: silver with gray decals

Weight according to the manufacturer: 245g
Weight weighed: 246g Scope of delivery: 1x NEWMEN rear hub MTB FADE Straightpull 6-hole black | 12x148mm thru axle BOOST | SRAM XD

EAN:
4054571185518

MPN:
90670