Best Guaranteed MANITOU Suspension Fork 27,5 +” | 29″ R7 Pro 100 mm | 15×110 mm BOOST 44 mm Offset | black

MANITOU suspension fork 27.5 +” | 29″ R7 Pro 100 mm | 15x110mm BOOST 44mm Offset | black

The legendary R7 fork is back. After almost 10 years of abstinence, Manitou is finally bringing her back. And of course she can convince all along the line. Responsiveness, driving experience and comfort, everything is at a high level.
The technical finesse shows that the developers have put a lot of thought into bringing a mature and high-quality product onto the market. The Dorado Air air spring with IVA volume adjustment, the VVT damping, the Hexloc thru-axle system and the striking chassis are unique features that make the hearts of cross-country bikers beat faster. But fans of a more classic look will also get their money’s worth. With the silver aluminum fork crown, the R7 suspension fork stands out from the crowd.

32mm chassis
The fork bridge that has been relocated to the rear can be installed lower than usual because the vertical distance between the tire and axle is smaller at this point. This achieves increased rigidity. That’s why, contrary to the general trend, Manitou continues to use 32 mm stanchions, thereby reducing the weight.

Dorado Air spring system
Manitou’s unique equalization valve inside the fork ensures the perfectly balanced pressure ratio in the positive and negative air chambers, which are filled simultaneously during inflation. This gives the spring rate a consistent feel throughout the travel.

IVA (Incremental Volume Adjustment)
This system adjusts the volume in the positive air chamber using self-supporting spacers. This allows you to adapt the spring characteristic to your needs.

VVT damping
Manitou also uses three different compression modes – Lock, Trail, Open. Depending on the lever position, the oil flows through the high-speed or low-speed channels. But even when closed, hard hits are dampened. If the system is open, the low-speed compression level is also adjusted using the red rotary knob. The rebound (or rebound) is adjusted very sensitively with 10 clicks on the lower blue wheel. By designing the damping as a cartridge, the amount of oil can be reduced and thus some weight can be saved.

Hexloc thru axle
Unlike the competition, a grub screw in the dropout on the left side pulls the thru axle into the fork. In addition, the hexagonal design prevents movements on the axle and thus increases torsional rigidity and steering precision.

One for almost everyone
The R7 suspension fork can be installed on 27.5+” and 29″ bikes. However, you should pay attention to the maximum tire width. Technical specifications:

Area of intended use : cross country, marathon, touring
E-bike ready: no
Wheel size: 27.5+” | 29″
Material fork crown/shaft: forged aluminium
Fork crown diameter: 57 mm
Material standpipes: 7000 aluminum
Standpipe diameter: 32 mm
Material immersion tubes: kA
Axle standard : axle type mm BOOST
Steerer tube: tapered 1 1/8″ – 1.5″
Steerer tube length: 250mm
Suspension travel: 100 mm (can be traveled to 90 or 80 mm)
Spring system: Air spring Dorado Air
Adjustment of the spring characteristic: yes, via Incremental Volume Adjust (IVA)
Damping: VTT Pro, adjustable low-speed compression, adjustable rebound
Lockout: fork crown
Installation height: 485 mm
Brake mount: Postmount PM6 (160 mm)
max. permissible brake disc size: 203 mm
Tire diameter max.: not specified
Tire width max.: 77 mm (27.5+”), 68 mm (29″)
Offset: 44mm
Colour: glossy black, fork crown: silver

Weight according to the manufacturer: 1648g
Weight weighed: 1655g (without fender, incl. thru axle) Scope of delivery:

1x MANITOU suspension fork 27.5 +” | 29″ R7 Pro 100 mm | 15x110mm BOOST 44mm Offset | black
1x thru axle
1x fender including fastening material

EAN:
847863026118

MPN:
191-36977-A001

PDF

Manuals / Downloads